Product Overview
GOLDEN® Pro Finishes Tinting Dispersions are made with an acrylic-resin binder and are tailored to work with waterborne acrylic systems. The acrylic-resin binder allows us to maximize performance with greater pigment loading. It also allows the colorants to be dispensed into waterborne systems at much higher levels without affecting a product’s performance. By comparison, UTCs (Universal Tinting Colorants) are glycol-based colorants that need to be compatible with a wide range of systems having vastly different characteristics.
Unlike acrylic paints, Pro Finishes Tinting Dispersions have a minimum of binder and other additives. Therefore, dispersions will not form a continuous, durable film, but will allow a product to be tinted with little or no impact to that product’s specific qualities.
Key Features
- Aqueous dispersions in an acrylic-resin system
- Artist grade, permanent, lightfast pigments
- Compatible with most water-based paints, mediums, or textures
- Ready to use
- Water clean up
Pro Finishes™ Tinting Dispersions
000D260 - 000D273
Description
GOLDEN® Pro Finishes Tinting Dispersions are made with an acrylic-resin binder and are tailored to work with waterborne acrylic systems. This binder allows us to maximize performance and pigment loading, while allowing the colorants to be dispensed into waterborne systems without affecting a product’s performance.
Unlike acrylic paints, Pro Finishes Tinting Dispersions have a minimum
of binder and other additives. Therefore, dispersions will not form a continuous, durable film, but will allow a product to be tinted with little or no impact to that product’s specific qualities.
Key Features
• Aqueous dispersions in an acrylic-resin system
• Artist grade, permanent, lightfast pigments
• Compatible with most water-based paints, mediums, or textures
• Ready to use
• Water clean up
Preparation
Before opening a container of Pro Finishes Tinting Dispersion, vigorously shake the container to make the product homogenous and
smooth. Failure to properly shake the product can result in an uneven consistency.
Application:
• Shake or stir thoroughly before use.
• Formulated as an additive only, do not use stand-alone.
• Use a maximum 10% (1:10) dispersion to compatible material.
• Always mix thoroughly until the product has been evenly distributed.
• Tinting strengths of pigments vary. Always test ratio before use.
• Test your technique on a practice board before applying to walls
• DO NOT USE with solvent-based materials
• For interior use.
Clean Up
Clean your skin and equipment immediately after use with soap and warm water. Keep tools wet while working. Dispose of as latex paint.
Storage
• Store in a cool/dry location @ temperatures between 40° F & 90° F.
• Do not allow material to freeze or be exposed to temperatures exceeding 120° F for extended periods.
Packaging
8 fl. oz. / 237 ml Bottle
Environmental & Transportation Information
VOC:170-315 g/l
Not RCRA Hazardous for disposal. Dispose of as latex paint.
Not Dangerous Goods for shipping via any mode.
